Prices incl. VAT plus shipping costs*
In Stock - Ready to ship,
Delivery time appr. 1-3 Workdays
- Order number: EDL-17303
- Notes:
Edelbrock part # 17303 fuel pump is a gravity-fed type pump with a simple 2 wire design. It requires approximately one amp average draw at maximum delivery and works on 12 Volt negative ground systems only. It features an in-line style rotor and vane pump design. 2-3.5 PSI, 30 GPH for most carbureted applications and is compatible with gasoline and E85. The pump has integrated 5/16 barb fittings on fuel outlet and 5/16 fitting on included fuel filter inlet.
- For use with standard 12-volt negative ground systems with 1 amp draw at maximum delivery
- Features an easy to setup 2-wire design
- Features a gravity-fed in-line, self-priming and regulating design
- Can also be used as a lift or transfer pump
- Designed for use with automotive and industrial applications
- Includes filter and all of the necessary hardware for installation
Fuel Pressure Regulator Needed: | No |
Max Fuel Pressure (psi): | 3.5 |
Gallons Per Hours: | 30 |
-
Determine the ideal mounting location for the fuel pump, a secure location like the frame is ideal. The fuel pump must be mounted at or below the lowest point of the fuel tank. The pump must also be within one foot of the fuel tank as it’s designed to push fuel from the tank towards the engine. WARNING: Fuel pump failure will occur if not mounted within the required specification
Variants available
Variants available
Variants available
Variants available
Variants available
Variants available
Variants available
Variants available
Variants available