Prices incl. VAT plus shipping costs*
Special Order. Estimated Shipping in 3-4 weeks.
- Order number: EDL-2090
- Notes: Results on a 351W Ford S/B w/9.5:1 compression.
1x | RPM Air Gap Manifold, Ford 351W / Satin | €607.25 |
2x | Cylinder Head, Ford 289-351W, E-CNC 185, 59cc,... | €3,182.00 |
1x | Rollin Thunder Camshaft, Ford 351W | €544.50 |
1x | Retro-Fit Hydraulic Roller Lifter Kit, Ford... | €1,129.00 |
1x | Hardened Steel Pushrod Sets, Ford 351W (7.714") | €214.25 |
1x | Timing Chain And Gear Set, Ford 289-302 & 351W... | €88.00 |
1x | Head Bolt Kit, E-Series, Ford 351W | €125.00 |
1x | Plated Intake Bolt Kit, Ford 351W | €54.25 |
1x | Head Gasket Set, Ford SB 289-302 & 351W | €170.00 |
1x | Timing Cover Gasket Kit, Ford Small Block | €38.25 |
Total: | €6,152.50 |
Compared to the single purchase
€307.50
saved!
Edelbrock Part # 2090 Performer RPM Top End Kit is designed for 1969-95 Small-Block Ford 351W V-8 engines. This Top End Kit produced 451 HP & 433 TQ on a 351W c.i.d engine with 9.5:1 compression. The kit delivers improved performance in street applications from 1,500 to 6,500 rpm range. This kit includes RPM Air-Gap intake manifold, RPM cylinder heads, pushrods and Rollin’ Thunder Hydraulic Roller camshaft, timing chain, complete bolt kits and an Edelbrock gasket set. To get great performance out of any engine, all of the components must work together. For over 30 years, the Edelbrock Total Power Package system has solved the parts matching puzzle for many street performance enthusiasts. With the introduction our Power Package Top End Kits, now you can get the best Edelbrock performance in-one-box, under one part number with “no guesswork” involved.
- Matched parts available under one part number
- All in one box convenience
- Make things easier in parts selection
- Includes almost everything you need
- Engine swaps
Serie: | Performer RPM |
RPM Range: | 1500-6500 |
Car/Engine: | Ford 351W |
Engine Notes: | 1969-95 351W w/Hydraulic roller cam |
-
- For 351W S/B Ford, 1969-95 w/Hydraulic roller cam
- Results on a 351W Ford S/B w/9.5:1 compression.
- Proper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehicle damage.
- Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.
- Sealant must be used on intake bolt threads if the threads extend into lifter valley or coolant passage.
- NPT/Pipe thread fittings require the use of Teflon tape or paste on threads to ensure proper seal.
- DO NOT OVERTIGHTEN NPT/Pipe fittings, this may cause the aluminum to crack around the fitting boss. NPT/Pipe thread is a tapered thread.
Variants available
Variants available
Variants available