Edelbrock 22015 - Rollin Thunder Kit, Chevrolet Small Block 57-86

Rollin Thunder Kit, Chevrolet Small Block 57-86
€1,861.00 *

Prices incl. VAT plus shipping costs*

Special Order: Estimated Shipping in 4 workdays*,
(if available at manufacture*)

  • EDL-22015
  • This camshaft works great when matched with Performer RPM Air-Gap intake manifold #7516, Thunder Series AVS carb #1813, and Performer RPM E-Tec cylinder heads #60975; this combo produces 435 HP / 435 ft-lbs. of torque.
1x
Rollin Thunder Camshaft, Chevrolet SBC 283-400 1957-1986
Rollin Thunder Camshaft, Chevrolet SBC 283-400...
1x
Retro-Fit Hydraulic Roller Lifter Kit, Chevrolet Small Block
Retro-Fit Hydraulic Roller Lifter Kit,...
1x
Hardened Steel Pushrod Sets, Chevrolet Small Block (7.265")
Hardened Steel Pushrod Sets, Chevrolet Small...
1x Rollin Thunder Camshaft, Chevrolet SBC 283-400... €536.50
1x Retro-Fit Hydraulic Roller Lifter Kit,... €1,128.75
1x Hardened Steel Pushrod Sets, Chevrolet Small... €240.50
Total: €1,905.75

Compared to the single purchase

€44.75

saved!

Edelbrock Part # 22015 Rolling’ Thunder camshaft kit is designed for 1957-86 small-block Chevy... more
Edelbrock 22015 - Rollin Thunder Kit, Chevrolet Small Block 57-86

Edelbrock Part # 22015 Rolling’ Thunder camshaft kit is designed for 1957-86 small-block Chevy V-8 applications. This complete cam kits include an Edelbrock Rollin’ Thunder hydraulic roller camshaft, hydraulic roller lifters and pushrods. The Rolling’ Thunder camshaft kit is ground specifically for use with the corresponding Performer or Performer RPM manifold and cylinder heads. However, Rolling’ Thunder camshaft package may also be used with other components designed to operate in a similar RPM range

  • Complete cam kit
  • Hydraulic roller lifters/pushrods Dyno-Matched
  • 1957-1986 Chevy small block
  • Trouble-free installation
Car/Engine: Chevrolet Small Block
Engine Notes: 283-400 cui V8 1957-1986
Camshaft Type: Hydraulic Roller
Serie: Rollin' Thunder
RPM Range: 1500-6500
Duration @ .050 Int/Exh: 234°/238°
Lift @ Valve Int/Exh: .539"/.548"
Lobe Separation: 112°
Intake Center Line: 107°
Idle Vacuum @ 1000 RPM: 12"
Related links
Installation Notes
    • This camshaft is designed to function with Valve Springs that have a closed pressure of 150 lbs, open pressure of 420 lbs and a lift of .550
    • Compression ratio of at least 9.5:1
    • Adjustable valvetrain required
    • For street high-performance and racing applications only
    • Lower than stock rear gearing
    • High performance torque converter (in automatic transmission equipped vehicles) are necessary.
    • Please be advised that an improper installation may result in LOW MILEAGE, POOR PERFORMANCE, and COSTLY REINSTALLATION AND EVEN ENGINE DAMAGE. Installing a camshaft is a complex procedure. Please follow these instructions carefully. Failure to do so may void your warranty.
Read, write and discuss reviews... more
Customer review for "Rollin Thunder Kit, Chevrolet Small Block 57-86"
Write an review
Reviews will be activated after verification.

The fields marked with * are required.

I have read the data protection information.

Viewed