Edelbrock 60815 - Cylinder Head, Chevrolet 348/409 W, Performer RPM, 16cc, Hydraulic Roller

€1,840.50 *

Prices incl. VAT plus shipping costs*

Special Order: Estimated Shipping in 4-8 workdays*,
(if available at manufacture*)

  • EDL-60815
The Edelbrock #60815 Performer RPM cylinder head is designed for 1958-1965 Chevrolet "W" Series... more
Edelbrock 60815 - Cylinder Head, Chevrolet 348/409 W, Performer RPM, 16cc, Hydraulic Roller

The Edelbrock #60815 Performer RPM cylinder head is designed for 1958-1965 Chevrolet "W" Series 348/409 big-block applications. The Edelbrock #60815 Performer RPM head is perfect for street performance, daily drivers, street rods and muscle cars where seat-of-the-pants performance is needed. This cylinder head delivers great throttle response and power from 1500 to 6500 rpm. They also feature the highest quality intake and exhaust valves and valve springs.

  • Out-of-the-box bolt-on performance
  • Hand-blended intake and exhaust bowls
  • CNC-Matched intake/exhaust ports in std location
  • Thicker deck surfaces than other brands
Car/Engine: Chevrolet W-Series
Port Volume Intake / Exh: 220cc / 115cc
Serie: Performer RPM
Engine Notes: 348-409 cui
HP Range: 400-600
Exhaust Port Location: Standard
Chamber Volume: 16cc
Valve Sizes Intake / Exh: 2.19'' / 1.72''
Camshaft Type: Hydraulic Roller
Max. Lift: 0.650''
Valve Spring Diameter: 1.55''
Related links
Documentation... more
Installation Notes
    • EQUIPPED WITH SPRINGS FOR USE IN MECHANICAL FLAT TAPPET AND HYDRAULIC ROLLER CAMSHAFT APPLICATIONS
    • Original port locations and valve angles for bolt-on convenience
    • CNC port matched 220cc intake and 115cc exhaust ports for optimum flow and power
    • Improved port design for more performance
    • Hardened spring cups, screw-in rocker studs and hardened guide plates
    • 1958 348 c.i.d. applications will require modifications to cylinder head (contact Edelbrock tech department for detailed information)
    • Use Edelbrock head gasket sets.
    • May be used on 348 engines with valve lifts up to .550" only.
    • Recommended spark plugs are Champion RC12YC or equivalent 14mm x 3/4" reach with flat gasket seat.
    • These heads will only fit 1958-65 348 c.i.d. "W" engines if an Edelbrock #5409, #7159 or stock large port 409 c.i.d. manifold is used.
    • Proper cylinder wall notching must be checked to ensure exhaust valve to cylinder clearance.
    • Deck thickness: 9/16"
    • Rocker stud diameter: 7/16"
    • Pushrod diameter: 3/8" (width of slot in guide plate)
Read, write and discuss reviews... more
Customer review for "Cylinder Head, Chevrolet 348/409 W, Performer RPM, 16cc, Hydraulic Roller"
Write an review
Reviews will be activated after verification.

The fields marked with * are required.

I have read the data protection information.

Viewed