Previous
Next
![Intake Manifold Spacer, Ford 5.0L Victor EFI, For Edelbrock #2945](https://www.gooze.com/media/image/9a/a9/c1/008728_v1_20090224_600x600.jpg)
€202.75 *
Prices incl. VAT plus shipping costs*
Special Order. if available at Manufacture: Estimated Shipping in 3-4 weeks.
- Order number: EDL-8728
- Notes:
Edelbrock Part # 8728 spacer kit includes a 7/16" thick spacer and two 3/64" thick gaskets for... more
Edelbrock 8728 - Intake Manifold Spacer, Ford 5.0L Victor EFI, For Edelbrock #2945
Edelbrock Part # 8728 spacer kit includes a 7/16" thick spacer and two 3/64" thick gaskets for a total thickness of 1/2". The kit also has new base to upper fasteners to accommodate the spacer. There are several benefits to the kit. First it raises the upper manifold 1/2” for increase valve cover to upper plenum clearance. It also provides heat insulation between the lower and upper manifolds. As a third benefit the 1/2" extra runner length helps to produce more torque. Fits all Victor 5.0 PN 2945 based manifolds.
- Fiber laminate spacers
- Provide heat insulation between upper and lower
- Creates cooler/denser charge
- Raise intake 0.5 inch for more valve cover clearance
- Includes all necessary hardware for installation
- Engine swaps
Related links
Installation Notes
-
- We recommend the use of Edelbrock Gasgacinch (Part #9300) on the intake manifold mounting surfaces of the cylinder head and on the bottom side of the intake manifold gaskets (side without silicon beads). The Gasgacinch will secure the gaskets in place, ensuring a proper seal.
- Do not overtighten the manifold to base fasteners. Use a short box or open-end wrench only.
- Do not disconnect fuel lines unless absolutely necessary. Special tools and procedures are required to re-install fuel lines.
- You must check your hood clearance before installation. Due to the 1/2 inch raise
Viewed