Carburetor, AVS 2 Series, 650 CFM, Off-Road, Manual Choke

The Edelbrock AVS2 Off-Road Carburetor #1915 with Manual Choke is a special 650 CFM version of the proven #1905 street carb with Annular Flow Booster technology for near-EFI-like drivability that you can feel as soon as you step on the gas. Like AVS2 street carbs, the AVS2 Off-Road features an annular ring with eight orifices that replaces the standard single brass tube (down-leg) fuel feed. The AVS2 Off-Road booster ring distributes fuel into the airflow stream with an even spray that eliminates flat spots and greatly improves throttle response in the low- to mid-RPM range without sacrificing top-end power.For superior fuel control over rough terrain, the AVS2 Off-Road features a new spring-loaded needle and seat along with a spring-loaded anti-syphon ball in the accelerator pump circuit to prevent fuel drip common with standard carbs in off-road situations.The AVS2 Off-Road is unaffected by engine backfires since there are no power valves to blow out. For fast and simple part-throttle tuning, metering rods and springs can be changed in seconds without carburetor removal or fuel draining. AVS2 Off-Road carbs have the unique ability to "hold a tune” when compared to other carburetors. Your tuning and adjustments stay unchanged, so performance remains consistent. Updated primary and secondary booster clusters in the AVS2 Off-Road offer the most accurate and up-to-date calibration available for today's fuels and octane levels. Additionally, the unique Qwik-Tune Secondary Air Valve allows for limitless calibration of the secondary circuit. Adjustments can be with simple hand tools in seconds to suit your application.AVS2 Off-Road Carburetors feature a two-piece design for easy tuning that allows you to make float level adjustments or replace internal components without draining the carburetor or removing it from the engine. The AVS2 Off-Road 650 CFM is available with a manual (#1915) or electric (#1916) choke and is manufactured by Edelbrock in the USA.

Details
Barrel: 4
CFM: 650
Carburator Setup: Single-Carburator
Choke: Manual
Color/Finish: Satin
Emission: Without EGR
Flange: Square Bore
Usage: Off-Road
Available downloads:
Download instructions

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Carburetor, AVS 2 Series, 650 CFM, Off-Road, Manual Choke

The Edelbrock AVS2 Off-Road Carburetor #1915 with Manual Choke is a special 650 CFM version of the proven #1905 street carb with Annular Flow Booster technology for near-EFI-like drivability that you can feel as soon as you step on the gas. Like AVS2 street carbs, the AVS2 Off-Road features an annular ring with eight orifices that replaces the standard single brass tube (down-leg) fuel feed. The AVS2 Off-Road booster ring distributes fuel into the airflow stream with an even spray that eliminates flat spots and greatly improves throttle response in the low- to mid-RPM range without sacrificing top-end power.For superior fuel control over rough terrain, the AVS2 Off-Road features a new spring-loaded needle and seat along with a spring-loaded anti-syphon ball in the accelerator pump circuit to prevent fuel drip common with standard carbs in off-road situations.The AVS2 Off-Road is unaffected by engine backfires since there are no power valves to blow out. For fast and simple part-throttle tuning, metering rods and springs can be changed in seconds without carburetor removal or fuel draining. AVS2 Off-Road carbs have the unique ability to "hold a tune” when compared to other carburetors. Your tuning and adjustments stay unchanged, so performance remains consistent. Updated primary and secondary booster clusters in the AVS2 Off-Road offer the most accurate and up-to-date calibration available for today's fuels and octane levels. Additionally, the unique Qwik-Tune Secondary Air Valve allows for limitless calibration of the secondary circuit. Adjustments can be with simple hand tools in seconds to suit your application.AVS2 Off-Road Carburetors feature a two-piece design for easy tuning that allows you to make float level adjustments or replace internal components without draining the carburetor or removing it from the engine. The AVS2 Off-Road 650 CFM is available with a manual (#1915) or electric (#1916) choke and is manufactured by Edelbrock in the USA.

Details
Barrel: 4
CFM: 650
Carburator Setup: Single-Carburator
Choke: Manual
Color/Finish: Satin
Emission: Without EGR
Flange: Square Bore
Usage: Off-Road

Available downloads:
Download instructions

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Accessory Items

Carburetor Stud Kit, 1.375 Inch, Zinc

Edelbrock

Part number: 8008

€18.25 incl. vat
Carburetor Stud Kit, 1.75 Inch, Zinc

Edelbrock

Part number: 8024

€24.50 incl. vat
Automatic Trans. Cable Adapter, for GM 2004R, 700R4, 4L60

Edelbrock

Part number: 8026

€23.25 incl. vat

European
Holley Dealer

To Holley

Last Viewed

Edelbrock

Embark on a thrilling journey of power and precision with Edelbrock, your trusted source for top-tier performance parts. We redefine driving with high-performance components like state-of-the-art carburetors, precision-engineered intake manifolds, and more—all crafted to elevate your vehicle's performance. Optimize every horsepower with Edelbrock's blend of innovation, reliability, and craftsmanship. Our products meet the highest standards, satisfying automotive enthusiasts and professionals alike. Edelbrock offers carburetors that breathe life into engines and intake manifolds designed for seamless integration, enhancing airflow and power. Whether you need camshafts or other components, Edelbrock delivers cutting-edge solutions that redefine performance. Choose Edelbrock because we share your passion for powerful vehicles. Our performance parts unleash your engine's full potential, providing an unparalleled driving experience. Maximize efficiency, elevate performance, and let your engine roar with Edelbrock Performance Parts. Experience the power and precision that turn drives into extraordinary journeys.