Prices incl. VAT plus shipping costs*
In Stock - Ready to ship,
Delivery time appr. 1-3 Workdays
- Order number: EDL-85512
- Notes:
Edelbrock E-Series Cylinder Head Bolt Kit #85512 is a high-quality replacement set of bolts with washers for use with Chevy big-block engines equipped with Performer and Performer RPM aluminum heads. This E-Series bolt kit can be used on all Mark IV and Mark V engine blocks. E-Series bolts have a yield tensile strength of 190,000 PSI for strong and reliable loading with generous filleting throughout to eliminate stress risers. Bolt threads are rolled after heat-treating for superior form and strength, while a small hex head provides extra space for socket clearance in tight situations. E-Series Cylinder Head Bolts have a durable black oxide finish with sealer and come with the distinctive Edelbrock “E” stamped into the head.
- For Chevy big-block Mark IV and V engines with aluminum heads
- Small hex head provides extra socket clearance
- Durable black oxide finsh
- Washers included
- Rated at 190000 psi
- Lenghts: (8) 2.25 in, (4) 3.75 in, (12) 4.25, (8) 5.25 in
Car/Engine: | Chevrolet Big Block |
Serie: | E-Series |
Engine Notes: | For Chevy big-block Mark IV and V engines with aluminum heads |
-
- For Chevy big-block Mark IV and V engines with aluminum heads
- Installation is the same as for original equipment cylinder heads.
- Consult service manual for specific procedures, if necessary.
- Be sure that the surface of the block and the surface of the head are thoroughly cleaned to remove any oily film before installation.
- Use alcohol or lacquer thinner on a lint-free rag to clean. Apply oil or suitable thread lubricant to head bolt threads and the underside of bolt heads and washers.
- Torque cylinder head bolts in three steps following the factory tightening sequence