![Performer EPS Manifold Kit, Chevrolet Small Block, 55-86](https://www.gooze.com/media/image/e5/ee/51/002040_v1_20120229_600x600.jpg)
inkl. MwSt. zzgl. Versandkosten
In Stock - Ready to ship,
Delivery time appr. 1-3 Workdays
- Artikel-Nr.: EDL-2040
- Notes:
1x | Performer EPS Manifold, Chevrolet Small Block,... | 239,50 € |
1x | Intake Gasket, Chevrolet 302-327-350-400, '58-'86 | 32,00 € |
1x | Plated Intake Bolt Kit, Chevrolet Small Block... | 40,25 € |
1x | Carburetor Stud Kit, 1.375 Inch, Zinc | 17,75 € |
1x | Base Gaskets, For Edelbrock/Square-Bore, Set of 2 | 20,25 € |
1x | Silincone Gaskets, RTV, 15ml, Black | 15,25 € |
Summe: | 365,00 € |
Gegenüber dem Einzelkauf
18,00 €
gespart!
Edelbrock Part # 2040 Manifold Installation kit will simplify the process of adding more power and efficiency to your street rod or muscle car. It combines all the necessary components to replace your stock iron intake manifold with an Edelbrock aluminum intake manifold. Kit includes: Performer EPS intake manifold #2701, intake gasket set, carburetor base gasket, RTV sealant, intake bolts and carburetor studs.
- Clean positive seal
- Embossed silicone bead surrounding the port
- Matched to manifolds and cylinder heads
Color/Finish: | Satin |
Carburator Setup: | Single-Carburator |
Serie: | Performer EPS |
Car/Engine: | Chevrolet Small Block |
Engine Notes: | 262-400 cui - 1986 and earlier |
-
- Manifold height: A-3.74", B-4.80"
- Carburetor pad height: 4.27"
- Port exit dimensions: 1.15" x 1.87".
- Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.
- Sealant must be used on intake bolt threads if the threads extend into lifter valley or coolant passage.
- NPT/Pipe thread fittings require the use of Teflon tape or paste on threads to ensure a proper seal.
- DO NOT OVERTIGHTEN NPT/Pipe fittings, this may cause the aluminum to crack around the fitting boss. NPT/Pipe thread is a tapered thread.
- Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
- Will not fit under stock Corvette hood.
- Even though manifolds are compatible with EGR systems, this does not mean they are legal for use on emissions controlled vehicles. Check local laws for legality.
- Proper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehicle damage.
Variants available
Variants available
Variants available
Variants available
Variants available
Variants available
Variants available
Variants available
Variants available
Variants available
Variants available
Variants available
Variants available