Edelbrock 2101 - Performer Manifold, Chevrolet Small Block, 55-86, for Corvette

346,25 €

inkl. MwSt. zzgl. Versandkosten

In Stock - Ready to ship,
Delivery time appr. 1-3 Workdays

Color:

  • EDL-2101
Edelbrock Part # 2101 Performer intake manifold is designed for street 1955-86 small-block... mehr
Edelbrock 2101 - Performer Manifold, Chevrolet Small Block, 55-86, for Corvette

Edelbrock Part # 2101 Performer intake manifold is designed for street 1955-86 small-block Chevys. Edelbrock's Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response from off-idle through 5500rpm. The Performer intake manifolds are ideal for passenger cars, trucks, 4x4s, tow vehicles and RVs. Not for 1987 and later cast iron or Chevy Bowtie heads. Will fit 1987 and later stock aluminum heads.

  • Fits under stock Corvette hood, a lower air cleaner may be necessary
  • For idle to 5500 RPM street-driven performance
  • Dual-plane low-rise intake with 180-degree firing order
  • Patented runner design ensures broad torque curve
  • Excellent throttle response and mid-range power
  • Accepts late-model choke, water neck and HEI ignition
  • Accepts A/C and alternator
  • Accepts exhaust heated chokes
Car/Engine: Chevrolet Small Block
Engine Notes: 262-400 cui - 1986 and earlier
Color/Finish: Polished, Satin
RPM Range: Idle-5500
Serie: Performer
Emission: Without EGR
Flange: Square Bore, Spread Bore
Intake Style: Dual Plane
Usage: Street
Carburator Setup: Single-Carburator
Weiterführende Links
Dokumentation... mehr
Installation Notes
    • Manifold height: A-3.50", B-4.60"
    • Carb pad height: 4.05"
    • Carb recommendations: OEM 4-Bbl, Use choke rod # 9171. Edelbrock AVS2 Series or Performer Series Carb 500-650cfm. Bracket # 8031 or # 8036 for 1972-1978.
    • Port exit dimensions: 1.14" x 1.88"
    • Recommended intake gasket: Edelbrock # 7201.
    • Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant # 1076, DO NOT USE END SEALS GASKETS.
    • Sealant must be used on intake bolt threads if the threads extend into lifter valley or coolant passage.
    • NPT/Pipe thread fittings require the use of Teflon tape or paste on threads to ensure a proper seal.
    • DO NOT OVERTIGHTEN NPT/Pipe fittings, this may cause the aluminum to crack around the fitting boss. NPT/Pipe thread is a tapered thread.
    • Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
    • Choke plate # 8901 included
    • Camshaft Recommendations: #2102, #2103, #2208, #2209
    • Even though manifolds are compatible with EGR systems, this does not mean they are legal for use on emissions controlled vehicles. Check local laws for legality.
    • Proper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehicle damage.
Bewertungen lesen, schreiben und diskutieren... mehr
Kundenbewertungen für "Performer Manifold, Chevrolet Small Block, 55-86, for Corvette"
Bewertung schreiben
Bewertungen werden nach Überprüfung freigeschaltet.

Die mit einem * markierten Felder sind Pflichtfelder.

Ich habe die Datenschutzbestimmungen zur Kenntnis genommen.

Variants available

Variants available

Breather & Grommet Breather & Grommet
ab
19,50 €
incl. vat

Variants available

Variants available

Variants available

Variants available

Variants available

Zuletzt angesehen