Rollin Thunder Camshaft, Chevrolet LT1/LT4

Rollin Thunder Camshaft, Chevrolet LT1/LT4

710,25 €

inkl. MwSt. zzgl. Versandkosten

Sonderbestellung: Geschätzter Versand in 4-8 Arbeitstage*,
(falls beim Hersteller verfügbar*)

Artikel-Nr.: EDL-2108
Notes: This camshaft works great when matched w/ RPM Air-Gap intake manifold #7109 and RPM LT4 cylinder heads #61939; this combo produces 430 HP / 420 ft.-lbs. of torque. Can also be used with standard or automatic transmission. Reflash of your ECU is required.

Edelbrock Rollin' Thunder camshafts are designed to improve horsepower and torque, produce a... mehr

Menü schließen

Edelbrock 2108 - Rollin Thunder Camshaft, Chevrolet LT1/LT4

Edelbrock Rollin' Thunder camshafts are designed to improve horsepower and torque, produce a great sounding performance idle and provide excellent vacuum at idle to support power accessories. Rollin' Thunder camshafts feature more aggressive lift profiles than possible with conventional flat-tappet hydraulic cams, without excessive valve overlap that can compromise low rpm drivability; reduced friction provided by roller tappets makes this combination of accelerated valve lift and reduced duration possible. Edelbrock Rollin' Thunder camshafts are performance-matched to Edelbrock Total Power Package components for proven performance.

Designed for 1500 to 6500 performance
Maximum power in high-RPM with good low-end torque
Matched to Edelbrock Performer RPM intakes
10 to 12 in. of manifold vacuum at idle
More lift and duration than most street camshafts
Dyno matched/street proven performance
Take the guesswork out of camshaft selection!
Use with high stall torque converter only
Engine swaps

Car/Engine:	Chevrolet - Late Models
Engine Notes:	LT1 1992-1997
Camshaft Type:	Hydraulic Roller
Serie:	Rollin' Thunder
RPM Range:	1500-6500
Duration @ .050 Int/Exh:	218°/218°
Lift @ Valve Int/Exh:	.525"/.525"
Lobe Separation:	112°
Intake Center Line:	112°
Idle Vacuum @ 1000 RPM:	15"

Weiterführende Links

Dokumentation... mehr

Menü schließen

Verfügbare Downloads:

Menü schließen

Installation Notes

- Compression ratio of at least 9.5:1
- Adjustable valvetrain required
- For street high-performance and racing applications only
- Lower than stock rear gearing
- High performance torque converter (in automatic transmission equipped vehicles) are necessary.
- Please be advised that an improper installation may result in LOW MILEAGE, POOR PERFORMANCE, and COSTLY REINSTALLATION AND EVEN ENGINE DAMAGE. Installing a camshaft is a complex procedure. Please follow these instructions carefully. Failure to do so may void your warranty.