inkl. MwSt. zzgl. Versandkosten
In Stock - Ready to ship,
Delivery time appr. 1-3 Workdays
- Artikel-Nr.: EDL-2186
- Notes:
Edelbrock Part # 2186 Performer 383 intake manifold is designed for street 361-383-400 c.i.d. Chrysler V8's that measure 7.75" across the block. May be used with OEM or aftermarket carbs. Edelbrock's Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response from off-idle through 5500rpm. This Performer intake manifold is ideal for passenger cars, trucks, 4x4s, tow vehicles and RVs.
- For idle to 5500 RPM street-driven performance
- Dual-plane low-rise intake with 180-degree firing order
- Patented runner design ensures broad torque curve
- Excellent throttle response and mid-range power
Car/Engine: | Chrysler Big Block |
Engine Notes: | 361-383-400 cui |
Color/Finish: | Satin |
RPM Range: | Idle-5500 |
Serie: | Performer |
Emission: | Without EGR, With EGR |
Flange: | Square Bore, Spread Bore |
Intake Style: | Dual Plane |
Usage: | Street |
Carburator Setup: | Single-Carburator |
-
- Recommended intake gasket: Edelbrock # 7225
- Manifold height: A-3.65", B-4.35", measured to engine block
- Carburetor pad height: 4.00"
- Carburetor recommendations: OEM 4-Bbl, Edelbrock Thunder AVS or Performer Series 600-800cfm.Use # 1481 or # 1483 throttle/transmission lever kit.
- Camshaft Recommendations: Performer-Plus #2192
- Port exit dimensions: 1.14" x 2.12"
- Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant # 1076, DO NOT USE END SEALS GASKETS.
- Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
Variants available
Variants available
Variants available
Variants available
Variants available
Variants available
Variants available
Variants available
Variants available
Variants available
Variants available