Rollin Thunder Camshaft, Ford Small Block 289-302

Rollin Thunder Camshaft, Ford Small Block 289-302

596,25 €

inkl. MwSt. zzgl. Versandkosten

In Stock - Ready to ship,
Delivery time appr. 1-3 Workdays

Artikel-Nr.: EDL-2221
Notes: This camshaft works great when matched with any aftermarket EFI system and Performer RPM cylinder heads #60255; this combo produces 384 HP / 347 ft.-lbs. of torque.

Edelbrock Rollin' Thunder camshafts are designed to improve horsepower and torque, produce a... mehr

Menü schließen

Edelbrock 2221 - Rollin Thunder Camshaft, Ford Small Block 289-302

Edelbrock Rollin' Thunder camshafts are designed to improve horsepower and torque, produce a great sounding performance idle and provide excellent vacuum at idle to support power accessories. Rollin' Thunder camshafts feature more aggressive lift profiles than possible with conventional flat-tappet hydraulic cams, without excessive valve overlap that can compromise low rpm drivability; reduced friction provided by roller tappets makes this combination of accelerated valve lift and reduced duration possible. Edelbrock Rollin' Thunder camshafts are performance-matched to Edelbrock Total Power Package components for proven performance.

Designed for 1500 to 6500 performance
Maximum power in high-RPM with good low-end torque
Matched to Edelbrock Performer RPM intakes
10 to 12 in. of manifold vacuum at idle
More lift and duration than most street camshafts
Dyno matched/street proven performance
Take the guesswork out of camshaft selection!
Use only stock ratio rocker arms
Engine swaps

Car/Engine:	Ford 260-289-302
Engine Notes:	289-302 cui
Camshaft Type:	Hydraulic Roller
Serie:	Rollin' Thunder
RPM Range:	1500-6500
Duration @ .050 Int/Exh:	227°/234°
Lift @ Valve Int/Exh:	.520"/.520"
Lobe Separation:	112°
Intake Center Line:	107°
Idle Vacuum @ 1000 RPM:	12"

Weiterführende Links

Dokumentation... mehr

Menü schließen

Verfügbare Downloads:

Menü schließen

Installation Notes

- Compression ratio of at least 9.5:1
- Adjustable valvetrain required
- For street high-performance and racing applications only
- Lower than stock rear gearing
- High performance torque converter (in automatic transmission equipped vehicles) are necessary.
- Please be advised that an improper installation may result in LOW MILEAGE, POOR PERFORMANCE, and COSTLY REINSTALLATION AND EVEN ENGINE DAMAGE. Installing a camshaft is a complex procedure. Please follow these instructions carefully. Failure to do so may void your warranty.