Rollin Thunder Kit, Ford 351W

1.792,50 €

Sonderbestellung: Geschätzter Versand in 4 Arbeitstage*,
(falls beim Hersteller verfügbar*)

Artikel-Nr.: EDL-22815
Notes: This camshaft works great when matched with RPM Air-Gap Dual Quad #75354 and Performer RPM cylinder heads #60255; this combo produces 449 HP / 413 ft.-lbs. of torque.

Edelbrock Part # 22815 Rolling’ Thunder camshaft kit is designed for 1969-93 small-block Ford... mehr

Edelbrock 22815 - Rollin Thunder Kit, Ford 351W

Edelbrock Part # 22815 Rolling’ Thunder camshaft kit is designed for 1969-93 small-block Ford 351W V-8 applications. This complete cam kits include an Edelbrock Rollin’ Thunder hydraulic roller camshaft, hydraulic roller lifters and pushrods. The Rolling’ Thunder camshaft kit is ground specifically for use with the corresponding Performer or Performer RPM manifold and cylinder heads. However, Rolling’ Thunder camshaft package may also be used with other components designed to operate in a similar RPM range.

Complete cam kit
Hydraulic roller lifters/pushrods dyno-matched
For 351 Windsor
Trouble-free installation
Engine swaps

Car/Engine:	Ford 351W
Engine Notes:	351W
Camshaft Type:	Hydraulic Roller
Serie:	Rollin' Thunder
RPM Range:	1500-6500
Duration @ .050 Int/Exh:	235°/238°
Lift @ Valve Int/Exh:	.573"/.582"
Lobe Separation:	112°
Intake Center Line:	107°
Idle Vacuum @ 1000 RPM:	10"

Weiterführende Links

Menü schließen

Installation Notes

- This camshaft is designed to function with Valve Springs that have a closed pressure of 150 lbs, open pressure of 420 lbs and a lift of .550.
- Compression ratio of at least 9.5:1
- Adjustable valve train required
- For street high-performance and racing applications only
- Lower than stock rear gearing
- High-performance torque converter (in automatic transmission equipped vehicles) are necessary.
- Please be advised that improper installation may result in LOW MILEAGE, POOR PERFORMANCE, and COSTLY REINSTALLATION AND EVEN ENGINE DAMAGE. Installing a camshaft is a complex procedure. Please follow these instructions carefully. Failure to do so may void your warranty.

Bewertungen lesen, schreiben und diskutieren... mehr

Menü schließen

Kundenbewertungen für "Rollin Thunder Kit, Ford 351W"

Bewertung schreiben

Bewertungen werden nach Überprüfung freigeschaltet.

1x	Rollin Thunder Camshaft, Ford 351W	544,50 €
1x	Retro-Fit Hydraulic Roller Lifter Kit, Ford...	1.129,00 €
1x	Hardened Steel Pushrod Sets, Ford 351W (7.714")	214,25 €