Performer Manifold, Oldsmobile 307-403, EGR

Performer Manifold, Oldsmobile 307-403, EGR

570,25 €

inkl. MwSt. zzgl. Versandkosten

Sonderbestellung: Geschätzter Versand in 4-8 Arbeitstage*,
(falls beim Hersteller verfügbar*)

Artikel-Nr.: EDL-3711
Notes:

Edelbrock Part # 3711 Performer Oldsmobile 350 EGR intake manifold is designed for street... mehr

Menü schließen

Edelbrock 3711 - Performer Manifold, Oldsmobile 307-403, EGR

Edelbrock Part # 3711 Performer Oldsmobile 350 EGR intake manifold is designed for street 307-330-350-403 c.i.d. Oldsmobile V8's, 1964-85. Will fit 1980-1/2 to 1985 307 c.i.d. V8's with 5A heads (casting #3317). This intake manifold comes with a universal pad to fit most carburetors with electric chokes.

For idle to 5500 RPM street-driven performance
Dual-plane low-rise intake with 180-degree firing order
Patented runner design ensures broad torque curve
Excellent throttle response and mid-range power

Car/Engine:	Oldsmobile
Engine Notes:	307-330-350-403 cui
Color/Finish:	Satin
RPM Range:	Idle-5500
Serie:	Performer
Emission:	With EGR
Flange:	Spread Bore
Intake Style:	Dual Plane
Usage:	Street
Carburator Setup:	Single-Carburator

Weiterführende Links

Dokumentation... mehr

Menü schließen

Verfügbare Downloads:

Download Instructions

Menü schließen

Installation Notes

- Carburetor recommendations: OEM 4-Bbl
- Edelbrock Performer Series, Thunder Series AVS, AVS2 and Carter AFB carburetors will not fit # 3711.
- Camshaft Recommendations: Performer-Plus #3712.
- Recommended intake gasket: Fel-Pro # MS96027
- For 403 Pontiac Trans Am, use OEM 4-bbl. only (for shaker hood clearance)
- EGR block-off plate included
- Use choke block-off plate # 8951 (included)
- Factory cruise control will not clear EGR valve without linkage alteration.
- HEI ignition will clear this manifold
- Manifold height: A-2.50", B-3.90"
- Carburetor pad height: 3.20"
- Port exit dimensions: 1.18" x 1.86"
- Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant # 1076, DO NOT USE END SEALS GASKETS.
- Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.