Performer Manifold, AMC 304-360-401, 70 up, EGR

Performer Manifold, AMC 304-360-401, 70 up, EGR

591,25 €

inkl. MwSt. zzgl. Versandkosten

Sonderbestellung: Geschätzter Versand in 4-8 Arbeitstage*,
(falls beim Hersteller verfügbar*)

Artikel-Nr.: EDL-3731
Notes:

Edelbrock Part # 3731 Performer AMC EGR intake manifold is designed for 1970-91 street... mehr

Menü schließen

Edelbrock 3731 - Performer Manifold, AMC 304-360-401, 70 up, EGR

Edelbrock Part # 3731 Performer AMC EGR intake manifold is designed for 1970-91 street 304-360-401 c.i.d. V8 engines. This intake manifold will not accept stock Motorcraft spread-bore carburetor.

For idle to 5500 RPM street-driven performance
Dual-plane low-rise intake with 180-degree firing order
Patented runner design ensures broad torque curve
Excellent throttle response and mid-range power

Car/Engine:	AMC / Jeep
Engine Notes:	290-304-360-401 cui
Color/Finish:	Satin
RPM Range:	Idle-5500
Serie:	Performer
Emission:	With EGR
Flange:	Square Bore
Intake Style:	Dual Plane
Usage:	Street
Carburator Setup:	Single-Carburator

Weiterführende Links

Dokumentation... mehr

Menü schließen

Verfügbare Downloads:

Download Instructions

Menü schließen

Installation Notes

- Recommended intake gasket: Recommended intake gasket: Edelbrock #7213 or Fel-Pro MS96011
- Must use factory style metal valley tray
- Manifold has two center bolt holes offset
- Manifold height: A-4.20", B-5.50"
- Carburetor pad height: 4.85"
- Carburetor recommendations: Requires Edelbrock # 8008 or # 8024 stud, nut and washer kit. OEM 4-Bbl
- Camshaft Recommendations: Performer-Plus #2132
- Port exit dimensions: 1.03" x 2.07"
- Edelbrock bracket # 8034 required for 1979 and later vehicles
- Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant # 1076, DO NOT USE END SEALS GASKETS.
- Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.