Torker-Plus Camshaft Kit, Chevrolet 283-400

513,75 €

In Stock - Ready to ship,
Delivery time appr. 1-3 Workdays

Artikel-Nr.: EDL-5002
Notes:

Designed to work with Torker II manifolds for performance from 2500 to 6500 rpm, these camshafts... mehr

Edelbrock 5002 - Torker-Plus Camshaft Kit, Chevrolet 283-400

Designed to work with Torker II manifolds for performance from 2500 to 6500 rpm, these camshafts are ideal for high-performance street, drag or marine applications. Torker-Plus cams have a slightly rough idle and are not suitable for trucks or towing applications. Hydraulic flat tappet lifters are included with each camshaft.

Designed for 2500 to 6500 performance
Designed for hi-performance street, drag or marine use
Matched to Edelbrock Torker II intakes
Includes hydraulic lifters and assembly lube
Dyno matched/street proven performance
Take the guesswork out of camshaft selection
Use only stock ratio rocker arms

Car/Engine:	Chevrolet Small Block
Engine Notes:	283-400 cui V8 1957-1986
Camshaft Type:	Hydraulic Flat Tappet
Serie:	Torker-Plus
RPM Range:	2500-6500
Duration @ .050 Int/Exh:	232°/234°
Lift @ Valve Int/Exh:	.488"/.488"
Lobe Separation:	108°
Intake Center Line:	106°

Weiterführende Links

Dokumentation... mehr

Menü schließen

Verfügbare Downloads:

Download Instructions

Menü schließen

Installation Notes

- Recommended Valve Springs for OEM heads: Edelbrock part # 5703
- Adjustable valvetrain required
- In order for this Torker cam and lifter kit to be covered under ANY WARRANTY you MUST use the correct Edelbrock Sure Seat Valve Springs or equivalent.
- Do not use rotator type valve springs or retainers for this application.
- Oil/additive must contain Zinc designed for use with flat tappet camshafts.
- Coat cam lobes and bottoms of each lifter with MoS2 lube (supplied) to prevent cam lobe and lifter wear from occurring during initial start-up.
- Do not allow the engine to run under 2000 rpm for the first 1/2 hour. Slow idle speeds may result in severe cam and lifter wear. Start the engine and bring to break-in rpm.