Edelbrock 60179 - Cylinder Head, Chrysler 340, Performer RPM, 65cc, Flat Tappet

1.118,75 €

inkl. MwSt. zzgl. Versandkosten

Sonderbestellung: Geschätzter Versand in 4-8 Arbeitstage*,
(falls beim Hersteller verfügbar*)

  • EDL-60179
The Edelbrock #60179 Performer RPM head is designed for use with non-emission 1968-73 Chrysler... mehr
Edelbrock 60179 - Cylinder Head, Chrysler 340, Performer RPM, 65cc, Flat Tappet

The Edelbrock #60179 Performer RPM head is designed for use with non-emission 1968-73 Chrysler 340 c.i.d. engine applications. The Edelbrock #60179 Performer RPM head is perfect for street performance, daily drivers, street rods and muscle cars where seat-of-the-pants performance is needed. This cylinder head delivers great throttle response and power from 1500 to 6500 rpm. They also feature the highest quality intake and exhaust valves and valve springs. For use on pre-pollution controlled vehicles only.

  • Out-of-the-box bolt-on performance
  • 65cc Combustion chambers improve performance
  • Retain stock compression ratio
  • Thicker deck surfaces than other brands
  • Engine swaps
Car/Engine: Chrysler Small Block
Port Volume Intake / Exh: 171cc / 77cc
Serie: Performer RPM
Engine Notes: 318-360 cui
HP Range: 350-450
Exhaust Port Location: Standard
Chamber Volume: 65cc
Valve Sizes Intake / Exh: 2.02'' / 1.60''
Camshaft Type: Hydraulic Flat Tappet
Max. Lift: 0.575''
Valve Spring Diameter: 1.46''
Weiterführende Links
Dokumentation... mehr
Installation Notes
    • EQUIPPED WITH SPRINGS FOR USE IN HYDRAULIC FLAT TAPPET CAMSHAFT APPLICATIONS
    • Designed for non-emission 1968-73 340 c.i.d. Chryslers, RPM Chrysler 340 cylinder heads have chambers machined .060" for clearance with early high-compression engines
    • Make 417 horsepower and 397 ft-lbs. of torque on pump gas with an Edelbrock Performer RPM intake manifold and matching camshaft
    • The special valvetrain in the 1970 340 T/A is not compatible with these cylinder heads. Match with Edelbrock head gasket sets.
    • Recommended spark plugs are Champion RC12YC or equivalent 14mm x 3/4" reach with flat gasket seat. Deck thickness: 5/8", pushrod diameter: 5/16".
Bewertungen lesen, schreiben und diskutieren... mehr
Kundenbewertungen für "Cylinder Head, Chrysler 340, Performer RPM, 65cc, Flat Tappet"
Bewertung schreiben
Bewertungen werden nach Überprüfung freigeschaltet.

Die mit einem * markierten Felder sind Pflichtfelder.

Ich habe die Datenschutzbestimmungen zur Kenntnis genommen.

Zuletzt angesehen