Cylinder Head, Chevrolet Small Block, Performer RPM, 70cc, Flat Tappet

Cylinder Head, Chevrolet Small Block, Performer RPM, 70cc, Flat Tappet

1.175,25 €

inkl. MwSt. zzgl. Versandkosten

Sonderbestellung: Geschätzter Versand in 4-8 Arbeitstage*,
(falls beim Hersteller verfügbar*)

Artikel-Nr.: EDL-60739
Notes:

The Edelbrock #60739 Performer RPM cylinder head is designed for 1955-86 Small-Block Chevy... mehr

Menü schließen

Edelbrock 60739 - Cylinder Head, Chevrolet Small Block, Performer RPM, 70cc, Flat Tappet

The Edelbrock #60739 Performer RPM cylinder head is designed for 1955-86 Small-Block Chevy applications. The Edelbrock #60739 Performer RPM head is perfect for street performance, daily drivers, street rods and muscle cars where seat-of-the-pants performance is needed. This cylinder head delivers great throttle response and power from 1500 to 6500 rpm. They also feature the highest quality intake and exhaust valves and valve springs.

With straight plugs
70cc Combustion chambers improve performance
Retain stock compression ratio

Car/Engine:	Chevrolet Small Block
Plug Type:	Straight
Port Volume Intake / Exh:	195cc / 65cc
Serie:	Performer RPM
Engine Notes:	262-400 cui
HP Range:	350-450
Intake Flange Style:	Standard
Exhaust Port Location:	Standard
Chamber Volume:	70cc
Valve Sizes Intake / Exh:	2.02'' / 1.60''
Camshaft Type:	Hydraulic Flat Tappet
Max. Lift:	0.575''
Valve Spring Diameter:	1.46''

Weiterführende Links

Dokumentation... mehr

Menü schließen

Verfügbare Downloads:

Menü schließen

Installation Notes

- EQUIPPED WITH SPRINGS FOR USE IN HYDRAULIC FLAT TAPPET CAMSHAFT APPLICATIONS
- Match with Edelbrock head gasket sets.
- To use stock rockers on small-block Chevy heads, .100" longer than stock pushrods are required. Edelbrock pushrods #9629 are recommended.
- Use Head Bolt Kits for easy installation. Recommended spark plugs are Champion RC12YC or equivalent 14mm x 3/4" reach with flat gasket seat.
- S/B Chevy heads may not be used on engines with less than 4" bore (262, 265, 283, 305, 307 c.i.d.) except with cams having less than .450" valve lift.