Performer RPM Manifold, Pontiac 326-455

563,25 €

inkl. MwSt. zzgl. Versandkosten

In Stock - Ready to ship,
Delivery time appr. 1-3 Workdays

Artikel-Nr.: EDL-7156
Notes:

Edelbrock Part # 7156 Performer RPM Pontiac intake manifold is designed for 1965-79 street... mehr

Menü schließen

Edelbrock 7156 - Performer RPM Manifold, Pontiac 326-455

Edelbrock Part # 7156 Performer RPM Pontiac intake manifold is designed for 1965-79 street 326-455 c.i.d. Pontiac V8's (except Ram Air V and 265/301 V8's). Recommended for high-performance street, strip and marine. Has clearance for HEI distributor. Will not fit under Trans Am Shaker hood without modifications.

Best for the ultimate in street high-performance
Designed for 1500 to 6500 RPM street-driven power
Dual-plane High-Rise intake with 180-degree firing order
Produces incredible top-end horsepower
Retains good throttle response and acceleration
Larger plenum and runners maximize other upgrades
Edelbrock total power package maximizes gains

Car/Engine:	Pontiac
Engine Notes:	326-455 cui
Color/Finish:	Satin
RPM Range:	1500-6500
Serie:	Performer RPM
Emission:	Without EGR
Flange:	Square Bore, Spread Bore
Intake Style:	Dual Plane
Usage:	Performance
Carburator Setup:	Single-Carburator

Weiterführende Links

Dokumentation... mehr

Menü schließen

Verfügbare Downloads:

Menü schließen

Installation Notes

- Recommended intake gasket: Edelbrock # 7280
- No provisions for OEM choke
- OEM carb requires conversion to electric/manual choke
- Carburetor recommendations: Edelbrock Thunder Series AVS, AVS2 or Performer Series 650-800 cfm.
- Camshaft Recommendations: Performer RPM #7157
- For 1968-71 use Edelbrock # 8015 throttle bracket
- Manifold height: 1-1/4" taller than stock, A-6.88", B-8.00" measured to engine block
- Carburetor pad height: 7.45"
- Port exit dimensions: 1.10" x 2.06"
- Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant # 1076, DO NOT USE END SEALS GASKETS.
- Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.