Performer RPM Manifold, Chevrolet 348/409 "W" Big Block, Large Port

Performer RPM Manifold, Chevrolet 348/409 "W" Big Block, Large Port

722,75 €

inkl. MwSt. zzgl. Versandkosten

Sonderbestellung: Geschätzter Versand in 4-8 Arbeitstage*,
(falls beim Hersteller verfügbar*)

Artikel-Nr.: EDL-7159
Notes:

Edelbrock Part # 7159 Performer RPM intake manifold is designed to fit 1958-1965 Chevrolet... mehr

Menü schließen

Edelbrock 7159 - Performer RPM Manifold, Chevrolet 348/409 "W" Big Block, Large Port

Edelbrock Part # 7159 Performer RPM intake manifold is designed to fit 1958-1965 Chevrolet 348/409 "W" big-block engines with factory large port or with our Performer RPM "W"-series heads #60809 or #60819. Includes Oil Fill Tube (not installed) and matching push-in breather cap. The Oil Fill Tube and Breather are also available separately as #4803. For square-bore carburetors only

Designed for 1500 to 6500 performance
1958-1965 W-series 348/409 big-block engines
For small port cast iron heads

Car/Engine:	Chevrolet W-Series
Engine Notes:	348-409 cui - Large Ports
Color/Finish:	Satin
RPM Range:	1500-6500
Serie:	Performer RPM
Emission:	Without EGR
Flange:	Square Bore
Intake Style:	Dual Plane
Usage:	Performance
Carburator Setup:	Single-Carburator

Weiterführende Links

Dokumentation... mehr

Menü schließen

Verfügbare Downloads:

Download Instructions

Menü schließen

Installation Notes

- Recommended intake gasket: Edelbrock # 7240 or Fel-Pro MS9788B
- Port exit dimensions: 2.39" x 1.16"
- Manifold Dimensions: A-4.35", B-5.54"
- Carb pad height: 4.62"
- Carb recommendations: Edelbrock AVS2 or Performer Series 600-800 cfm.
- Carburetor size (CFM) should be selected based on your specific engine combination.
- Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant # 1076, DO NOT USE END SEALS GASKETS.
- Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
- Sealant must be used on intake bolt threads if the threads extend into lifter valley or coolant passage.
- NPT/Pipe thread fittings require the use of Teflon tape or paste on threads to ensure a proper seal.
- DO NOT OVERTIGHTEN NPT/Pipe fittings, this may cause the aluminum to crack around the fitting boss. NPT/Pipe thread is a tapered thread.
- To ensure maximum performance and a proper seal, Edelbrock gaskets which are specifically designed and manufactured for use with Edelbrock parts must be used.
- Proper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehicle damage.

Bewertungen lesen, schreiben und diskutieren... mehr

Menü schließen

Kundenbewertungen für "Performer RPM Manifold, Chevrolet 348/409 "W" Big Block, Large Port"

Bewertung schreiben

Bewertungen werden nach Überprüfung freigeschaltet.