Edelbrock 7585 - RPM Dual-Quad Air-Gap Manifold, Ford 351W

683,25 €

inkl. MwSt. zzgl. Versandkosten

Sonderbestellung: Geschätzter Versand in 4-8 Arbeitstage*,
(falls beim Hersteller verfügbar*)

  • EDL-7585
Edelbrock Part # 7585 RPM Air-Gap Dual-Quad 351W intake manifold is designed for 351W... mehr
Edelbrock 7585 - RPM Dual-Quad Air-Gap Manifold, Ford 351W

Edelbrock Part # 7585 RPM Air-Gap Dual-Quad 351W intake manifold is designed for 351W small-block Fords. This intake offers performance improvements in the 1500-6500 rpm range. The large runners feature our unique Air-Gap design that separates the runners from the hot engine valley for a cooler, denser charge and more horsepower. Includes bosses for rear water crossover. Carb center to carb center is 6-7/16".

  • Based on C26 low profile with a unique air gap
  • Air gap cooler and denser mixture for more power
  • 1.625 inch taller than low-Profile #5425
  • Best when matched with Edelbrock 500cfm carburetors
  • Use fuel line kit #8088/8091
  • Use progressive throttle linkage kit #7094
Car/Engine: Ford 351W
Color/Finish: Satin
RPM Range: 1500-6500
Serie: RPM Air-Gap
Emission: Without EGR
Flange: Square Bore
Intake Style: Dual Plane
Usage: Performance
Carburator Setup: Dual-Quad
Weiterführende Links
Installation Notes
    • Use 12-bolt intake gasket set Edelbrock # 7220 recommended. For van installations use OEM Ford "van" intake gasket set
    • Manifold height: A-4.93", B-5.56"
    • Carburetor pad height: 4.32"
    • Carburetor recommendations: Edelbrock AVS2 Series # 1903 and # 1904, 500 cfm.
    • Port exit dimensions: 1.05" x 1.89"
    • Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant # 1076, DO NOT USE END SEALS GASKETS.
    • Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
Bewertungen lesen, schreiben und diskutieren... mehr
Kundenbewertungen für "RPM Dual-Quad Air-Gap Manifold, Ford 351W"
Bewertung schreiben
Bewertungen werden nach Überprüfung freigeschaltet.

Die mit einem * markierten Felder sind Pflichtfelder.

Ich habe die Datenschutzbestimmungen zur Kenntnis genommen.

Zuletzt angesehen