Timing Chain And Gear Set, Ford Small Block Late, 84-95, Stock Replacement

Timing Chain And Gear Set, Ford Small Block Late, 84-95, Stock Replacement

60,25 €

inkl. MwSt. zzgl. Versandkosten

In Stock - Ready to ship,
Delivery time appr. 1-3 Workdays

Artikel-Nr.: EDL-7814
Notes: Street legal timing chain sets include a heavy-duty double roller chain, not a True Roller chain.

Performer-Link timing chain sets are for use with Edelbrock or stock cams. They have a... mehr

Menü schließen

Edelbrock 7814 - Timing Chain And Gear Set, Ford Small Block Late, 84-95, Stock Replacement

Performer-Link timing chain sets are for use with Edelbrock or stock cams. They have a solid-bushing chain for a true bearing surface that rolls with the sprockets, eliminating chain stretch.

Solid bushing chain resists stretching
For use with stock or Edelbrock camshafts
Stressproof steel crank gears
3 Keyway setting points to ensure accurate timing
For engine with 2-piece Fuel Pump Eccentric or EFI
Stock replacement part

Car/Engine:	Ford 260-289-302, Ford 351W
Engine Notes:	260-289-302 cui, 351W, Street Legal Double Roller Chain, From 1984-1995

Weiterführende Links

Menü schließen

Installation Notes

- Performer roller chain sets are engineered to operate up to 6500 rpm.
- Never hammer directly on chain or sprockets. You can crack the hardened links and pins and cause early failures.
- Use a sleeve for installations that require hammering, a brass drift punch may be used if you carefully alternate blows on either side of the sprocket to avoid cocking.
- Never stretch the chain with a screwdriver.
- Check for clearance between the timing chain and block and between the chain and front cover before reassembly.
- Be sure that both cam and crank sprockets are exactly in line with each other. Misalignment can cause chain to break
- On some late-model engine blocks, it will be necessary to check clearance behind the cam sprocket (with the chain on the sprocket) and engine block at the 12 o