Timing Chain And Gear Set, Ford 289-302 & 351W 1962-84

Timing Chain And Gear Set, Ford 289-302 & 351W 1962-84

88,00 €

inkl. MwSt. zzgl. Versandkosten

In Stock - Ready to ship,
Delivery time appr. 1-3 Workdays

Artikel-Nr.: EDL-7820
Notes:

Performer-Link timing chain sets are for use with Edelbrock or stock cams. They have a... mehr

Menü schließen

Edelbrock 7820 - Timing Chain And Gear Set, Ford 289-302 & 351W 1962-84

Performer-Link timing chain sets are for use with Edelbrock or stock cams. They have a solid-bushing chain for a true bearing surface that rolls with the sprockets, eliminating chain stretch.

Solid bushing chain resists stretching
For use with stock or Edelbrock camshafts
Stress proof steel crank gears
3 Keyway setting points to ensure accurate timing
True bearing surface rolls with the sprockets
For engine with one-piece fuel pump eccentric

Car/Engine:	Ford 260-289-302, Ford 351W
Engine Notes:	351W, 255-289-302-302 BOSS, True Roller Chain, From 1963-1984

Weiterführende Links

Menü schließen

Installation Notes

- Performer roller chain sets are engineered to operate up to 6500 rpm.
- Never hammer directly on chain or sprockets. You can crack the hardened links and pins and cause early failures.
- Use a sleeve for installations that require hammering, a brass drift punch may be used if you carefully alternate blows on either side of the sprocket to avoid cocking.
- Never stretch the chain with a screwdriver.
- Check for clearance between the timing chain and block and between the chain and front cover before reassembly.
- Be sure that both cam and crank sprockets are exactly in line with each other. Misalignment can cause chain to break
- On some late-model engine blocks, it will be necessary to check clearance behind the cam sprocket (with the chain on the sprocket) and engine block at the 12 o