Edelbrock 85532 - Head Bolt Kit, E-Series, Ford 351W
Edelbrock E-Series Cylinder Head Bolt Kit #85532 is a high-quality set of bolts for use with Ford 351W heads. These bolts can also be used on 302-based Ford engines that have been converted to ½-inch head bolts. E-Series bolts have a yield tensile strength of 190,000 PSI for strong and reliable loading with generous filleting throughout to eliminate stress risers. Bolt threads are rolled after heat-treating for superior form and strength, while a small hex head provides extra space for socket clearance in tight situations. E-Series Cylinder Head Bolts have a durable black oxide finish with sealer and come with the distinctive Edelbrock “E” stamped into the head.
The Edelbrock #85532 is made specifically for 9.5 deck height small block Ford V8.
Installation is the same as for original equipment cylinder heads.
Consult service manual for specific procedures, if necessary.
Be sure that the surface of the block and the surface of the head are thoroughly cleaned to remove any oily film before installation.
Use alcohol or lacquer thinner on a lint-free rag to clean. Apply oil or suitable thread lubricant to head bolt threads and the underside of bolt heads and washers.
Torque cylinder head bolts in three steps following the factory tightening sequence
