MSD Super Conductor Wireset 8.5mm, Universal, Jetski, For 3-Cylinder
Spark plug wires have two main objectives; transfer the spark energy and suppress the Electro-Magnetic Interference (EMI) that the spark voltage creates. The MSD 8.5mm Super Conductor delivers the best of both worlds! MSD uses a special copper conductor keeping resistance under 50 ohms per foot! Even with this low resistance, the wire retains high EMI suppression capabilities. By wrapping the conductor tightly around a ferromagnetic impregnated center core an EMI choke is created keeping any interference inside the wire.
 
The Super Conductor wire is a high-performance wire from the inside out. The outer sleeve is a combination of silicone and synthetic materials for supreme resistance against heat, chemicals and abrasion. Thick boots with more material also help guard against spark arcing to ground and special dual crimp terminals grip the conductor and the sleeve of the wire so there is no chance of the terminal pulling off the wire.
  
  • Resistance less than 50 ohms/ft. for superior spark
  • Extra hvy glass braid; strong dielectric insulator
  • Helically wound copper alloy conductor
  • 40 Feet of conductor wound in one foot of wire
  • 8.5mm jacket protects from high heat or abrasion
  • Silicone and synthetic heat resistant boot
  • Ferro-magnetic impregnated core creates EMI choke
  • Core made with DuPont kevlar to add tensile strength
  • Extra-long 8.5mm wire so you can cut to your desired length
  • Includes Mini-Stripper-Crimper
  • Wire Lengths: 3x 30"
Details
Cable Lenghts: 30",30",30"
Color/Finish: Red
Distributor Terminal Ends: Male/HEI
Engine Notes: Jetski 3-Cylinder, Universal 3-Cylinder
Fitment: Universal Wire Sets
Spark Plug Boots Ends: 90°
Spark Plug Wire Resistance: 50 ohms/ft.
Wire Diameter: 8.5mm
Available downloads:
Download instructions

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


MSD Super Conductor Wireset 8.5mm, Universal, Jetski, For 3-Cylinder
Spark plug wires have two main objectives; transfer the spark energy and suppress the Electro-Magnetic Interference (EMI) that the spark voltage creates. The MSD 8.5mm Super Conductor delivers the best of both worlds! MSD uses a special copper conductor keeping resistance under 50 ohms per foot! Even with this low resistance, the wire retains high EMI suppression capabilities. By wrapping the conductor tightly around a ferromagnetic impregnated center core an EMI choke is created keeping any interference inside the wire.
 
The Super Conductor wire is a high-performance wire from the inside out. The outer sleeve is a combination of silicone and synthetic materials for supreme resistance against heat, chemicals and abrasion. Thick boots with more material also help guard against spark arcing to ground and special dual crimp terminals grip the conductor and the sleeve of the wire so there is no chance of the terminal pulling off the wire.
  
  • Resistance less than 50 ohms/ft. for superior spark
  • Extra hvy glass braid; strong dielectric insulator
  • Helically wound copper alloy conductor
  • 40 Feet of conductor wound in one foot of wire
  • 8.5mm jacket protects from high heat or abrasion
  • Silicone and synthetic heat resistant boot
  • Ferro-magnetic impregnated core creates EMI choke
  • Core made with DuPont kevlar to add tensile strength
  • Extra-long 8.5mm wire so you can cut to your desired length
  • Includes Mini-Stripper-Crimper
  • Wire Lengths: 3x 30"
Details
Cable Lenghts: 30",30",30"
Color/Finish: Red
Distributor Terminal Ends: Male/HEI
Engine Notes: Jetski 3-Cylinder, Universal 3-Cylinder
Fitment: Universal Wire Sets
Spark Plug Boots Ends: 90°
Spark Plug Wire Resistance: 50 ohms/ft.
Wire Diameter: 8.5mm

/media/db/61/5f/1730298781/3503.pdf?1730298781

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Accessory Items

Spark Guard, Dielectric grease

MSD Performance

Part number: 8804

€48.25 incl. vat
Dual Plug Wire Separators, 8-8.5mm, Set of 16

MSD Performance

Part number: 8841

€36.75 incl. vat
Pro-Clamp Wire Separators

MSD Performance

Part number: 8843

€44.00 incl. vat

European
Holley Dealer

To Holley

Last viewed products

MSD Performance

1Racers never stop experimenting as they search for every way to wring out more power or handling performance to to gain an edge over the competition. The team at MSD is no different as we strive to deliver the products you need to meet your performance goals. We continue to innovate and invent components and technology that deliver performance and reliability with products that are easy to use and install. Over the course of 40-plus years, MSD Performance has been driving the development of innovative components that helped shape the way our cars race and perform. From super speedways to road courses, land speed racing to top fuel dragsters, and of course your traditional hot rod, MSD has provided the components to fire nearly anything in motorsports. Early on, MSD focused squarely on ignition systems with revolutionary products like the multiple sparking CD ignition, timing and rev controls, billet aluminum distributors and the Pro-Mag, an incredible breakthrough in power and endurance. Today MSD is developing electronics for your entire powertrain. The Atomic EFI systems for the LS engine platform and throttle body are now complemented with a transmission controller. Our DynaForce Starters and Alternators ensure that your engine cranks over to fire up and the Alternators keep it charged. MSD is poised to deliver components that work and communicate together to provide performance and value.