Cylinder Heads, Ford Flathead, 1938-48, 65cc, 24 Studs, Script Logo (Pair)

€ 1.084,50 *

Prijzen incl. btw excl. verzendingskosten

In Stock - Ready to ship,
Delivery time appr. 1-3 Workdays

Productnr.: EDL-1125
Notes:

The Edelbrock #1125 Ford Flatheads feature the original Edelbrock script logo design for Fords... meer

Menu sluiten

Edelbrock 1125 - Cylinder Heads, Ford Flathead, 1938-48, 65cc, 24 Studs, Script Logo (Pair)

The Edelbrock #1125 Ford Flatheads feature the original Edelbrock script logo design for Fords and Mercurys, and are cast at the Edelbrock Foundry in the USA of T-6 tempered A356 aluminum. The Edelbrock #1125 heads are rugged, ribbed internally and externally, with a large water capacity and excellent breathing characteristics. The 65cc heads support 8.0:1 compression ratio on blocks with a 3/16" base relief (stock bore and stroke), compression ratio increase is approximately 3/10 of a percent with each 1/8" stroke.

Sold in a set of 2 heads
Famous flathead cylinder heads - But all new!
Rugged construction - Ribbed inside and out
Features large water capacity
Excellent breathing characteristics
Made from A356 aluminum and T-6 heat treated
8.0:1 Compression ratio figured on 0.1875 inch bloc
Compression ratio increased is 0.3 per 0.125 inch stroke

Car/Engine:	Ford Flathead
Engine Notes:	1938-48 Ford/Mecury, 24 stud
Chamber Volume:	65cc

Verdere links

Menu sluiten

Installation Notes

- Flathead head copper gaskets for 1938-48 use Victor #3036; or Fel-Pro® #7548; or Edelbrock Head Gasket Set #7394; for 1949-53 use Fel-Pro #1055 and Fel-Pro #1056 or Edelbrock Head Gasket Set #7393.
- Recommended spark plugs are Champion RC12YC or equivalent 14mm x 3/4" reach with flat gasket seat.
- Head stud kit for 1938-48, use #8505;
- Head stud kit for 1949-53, use #8502.
- Generator stud kit for 1938-48, use #8506.