Performer Top End Kit, Small Block Chevy, 363HP

€ 4.764,00 * € 5.015,25 * (5,01% bespaard)

Prijzen incl. btw excl. verzendingskosten

Speciale bestelling: Geschatte verzending over 4 Werkdagen*,
(indien beschikbaar bij de fabrikant*)

Productnr.: EDL-2089
Notes: Results on a 350 c.i.d. S/B w/9.0:1 compression and late model hydraulic roller cam.

Performer EPS Manifold, Chevrolet Small Block,...

Cylinder Head, Chevrolet Small Block, E-Tec...

Rollin Thunder Camshaft, Chevrolet SBC...

Hydraulic Roller Lifter Kit, Chevrolet Small...

Hardened Steel Pushrod Sets, Chevrolet Small...

Timing Chain And Gear Set, Chevrolet Small...

Head Bolt Kit, E-Series, Chevrolet Small Block

Plated Intake Bolt Kit, Chevrolet Small Block,...

head gasket set, Chevrolet Small Block with...

Timing Cover Gasket Kit, Chevrolet Small Block

Lifter Installation Kit, Small Block Chevy,...

1x	Performer EPS Manifold, Chevrolet Small Block,...	€ 448,75
2x	Cylinder Head, Chevrolet Small Block, E-Tec...	€ 2.673,00
1x	Rollin Thunder Camshaft, Chevrolet SBC...	€ 644,25
1x	Hydraulic Roller Lifter Kit, Chevrolet Small...	€ 359,00
1x	Hardened Steel Pushrod Sets, Chevrolet Small...	€ 226,75
1x	Timing Chain And Gear Set, Chevrolet Small...	€ 103,25
1x	Head Bolt Kit, E-Series, Chevrolet Small Block	€ 129,50
1x	Plated Intake Bolt Kit, Chevrolet Small Block,...	€ 49,00
1x	head gasket set, Chevrolet Small Block with...	€ 187,25
1x	Timing Cover Gasket Kit, Chevrolet Small Block	€ 21,50
1x	Lifter Installation Kit, Small Block Chevy,...	€ 173,00

Summe: € 5.015,25

Gegenüber dem Einzelkauf

€ 251,25

gespart!

Edelbrock Part # 2089 Performer Top End Kit is designed for 1987 & later Small-Block Chevy... meer

Menu sluiten

Edelbrock 2089 - Performer Top End Kit, Small Block Chevy, 363HP

Edelbrock Part # 2089 Performer Top End Kit is designed for 1987 & later Small-Block Chevy engines. This Top End Kit produced 363 HP & 405 TQ on a 350 c.i.d engine with 9.0:1 compression. The kit includes Performer EPS intake manifolds, E-Tec 170 cylinder heads, pushrods and Rollin’ Thunder Hydraulic Roller camshaft. To get great performance out of any engine, all of the components must work together. For over 30 years, the Edelbrock Total Power Package system has solved the parts matching puzzle for many street performance enthusiasts. With the introduction our Power Package Top End Kits, now you can get the best Edelbrock performance in-one-box, under one part number with “no guesswork” involved.

Matched parts available under one part number
All in one box convenience
Make things easier in parts selection
Includes almost everything you need
Engine swaps

Serie:	Performer
RPM Range:	1500-5500
Car/Engine:	Chevrolet Small Block
Engine Notes:	1987-Later 305-350 cui

Verdere links

Menu sluiten

Installation Notes

- For S/B Chevy, 1987 & later
- Results on a 350 c.i.d. S/B w/9.0:1 compression and retro-fit hydraulic roller cam.
- Proper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehicle damage.
- Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.
- Sealant must be used on intake bolt threads if the threads extend into lifter valley or coolant passage.
- NPT/Pipe thread fittings require the use of Teflon tape or paste on threads to ensure proper seal.
- Will not fit under stock Corvette hood.
- DO NOT OVERTIGHTEN NPT/Pipe fittings, this may cause the aluminum to crack around the fitting boss. NPT/Pipe thread is a tapered thread.

Lees, schrijf en bespreek beoordelingen...meer

Menu sluiten

Klantbeoordelingen voor "Performer Top End Kit, Small Block Chevy, 363HP"

Beoordeling schrijven

Beoordelingen worden na controle vrijgegeven.