Performer Manifold, Chevrolet Small Block, 87-95 cast Iron Heads

Performer Manifold, Chevrolet Small Block, 87-95 cast Iron Heads

€ 428,00 *

Prijzen incl. btw excl. verzendingskosten

Speciale bestelling: Geschatte verzending over 4-8 Werkdagen*,
(indien beschikbaar bij de fabrikant*)

Productnr.: EDL-2104
Notes:

Edelbrock Part # 2104 Performer intake manifold is designed for street 262-400 c.i.d. Chevy... meer

Menu sluiten

Edelbrock 2104 - Performer Manifold, Chevrolet Small Block, 87-95 cast Iron Heads

Edelbrock Part # 2104 Performer intake manifold is designed for street 262-400 c.i.d. Chevy V8's that have heads with canted center bolt holes, 1987-1995. Edelbrock's Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response. The Performer intake manifolds are ideal for passenger cars, trucks, 4x4s, tow vehicles and RVs. For 1987-95 stock aluminum heads use #2101.

For idle to 5500 RPM street-driven performance
Dual-plane low-rise intake with 180-degree firing order
Patented runner design ensures broad torque curve
Excellent throttle response and mid-range power
Accepts late-model choke, water neck and HEI ignition
Accepts A/C and alternator
Accepts exhaust heated chokes
Engine swaps

Car/Engine:	Chevrolet Small Block
Engine Notes:	262-400 cui - 1987-95 Cast Iron Heads
Color/Finish:	Black, Polished, Satin
RPM Range:	Idle-5500
Serie:	Performer
Emission:	Without EGR
Flange:	Square Bore, Spread Bore
Intake Style:	Dual Plane
Usage:	Street
Carburator Setup:	Single-Carburator

Verdere links

Documentatie... meer

Menu sluiten

Beschikbare downloads:

Download Instructions

Menu sluiten

Installation Notes

- Manifold ht: A-3.50", B-4.60"
- Carburetor pad height: 4.05"
- Carburetor recommendations: OEM 4-Bbl, Use choke rod # 9171. Edelbrock AVS2 Series or Performer Series Carb 500-650cfm. Bracket # 8031 or # 8036 for 1972-1978.
- Camshaft Recommendations: #2102, #2103, #2208, #2209
- Port exit dimensions: 1.14" x 1.88"
- Recommended intake gasket: GM #10159409
- Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant # 1076, DO NOT USE END SEALS GASKETS.
- Sealant must be used on intake bolt threads if the threads extend into lifter valley or coolant passage.
- NPT/Pipe thread fittings require the use of Teflon tape or paste on threads to ensure a proper seal.
- DO NOT OVERTIGHTEN NPT/Pipe fittings, this may cause the aluminum to crack around the fitting boss. NPT/Pipe thread is a tapered thread.
- Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
- Choke plate # 8901 included
- Even though manifolds are compatible with EGR systems, this does not mean they are legal for use on emissions controlled vehicles. Check local laws for legality.
- Proper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehicle damage.