Prijzen incl. btw excl. verzendingskosten
Speciale bestelling: Geschatte verzending over 4-8 Werkdagen*,
(indien beschikbaar bij de fabrikant*)
- Productnr.: EDL-2208
- Notes: This camshaft works great when matched w/ Performer EPS intake manifold #2716, Performer carb #1407, and Performer E-Tec cylinder heads #60975; this combo produces 363 HP / 402 ft-lbs of torque. Matching Edelbrock roller tappet lifter set #97423.
Edelbrock Rollin’ Thunder Camshaft # 2208 is designed for 265-350 V8 Chevy engines from 1957-86 and produces optimum torque from the low-end to the mid-range. Rollin’ Thunder camshafts should be matched with Performer manifolds for vehicles operating from off-idle to 5500 rpm. They are smooth idling cams for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. In the manifold section you'll find torque graphs showing the power gains from Performer manifolds and Performer-Plus cams. All camshafts include flat tappet lifters (except for cams designed for use with stock roller lifters), assembly lube and instructions.
- Feature more aggressive profiles
- Without excessive valve overlap
- Reduce friction
- Virtually eliminate break-in problems
- Dyno tested
Car/Engine: | Chevrolet Small Block |
Engine Notes: | 265-350 V8 1957-1986 |
Camshaft Type: | Hydraulic Roller |
Serie: | Rollin' Thunder |
RPM Range: | 1500-5500 |
Duration @ .050 Int/Exh: | 212°/222° |
Lift @ Valve Int/Exh: | .462"/.479" |
Lobe Separation: | 112° |
Intake Center Line: | 107° |
Idle Vacuum @ 1000 RPM: | 16" |
-
- Compression ratio of at least 9.5:1
- Adjustable valvetrain required
- For street high-performance and racing applications only
- Lower than stock rear gearing
- High performance torque converter (in automatic transmission equipped vehicles) are necessary.
- Please be advised that an improper installation may result in LOW MILEAGE, POOR PERFORMANCE, and COSTLY REINSTALLATION AND EVEN ENGINE DAMAGE. Installing a camshaft is a complex procedure. Please follow these instructions carefully. Failure to do so may void your warranty.
Variants available
Variants available
Variants available
Variants available
Variants available
Variants available
Variants available
Variants available