Prijzen incl. btw excl. verzendingskosten
Special Order. if available at Manufacture: Estimated Shipping in 3-4 weeks.
- Productnr.: EDL-2218
- Notes: This camshaft works great when matched with E-CNC 215 cylinder heads #79949; this combo produces 494 HP / 439 ft.-lbs. of torque.
Edelbrock Rollin' Thunder camshafts are designed to improve horsepower and torque, produce a great sounding performance idle and provide excellent vacuum at idle to support power accessories. Rollin' Thunder camshafts feature more aggressive lift profiles than possible with conventional flat-tappet hydraulic cams, without excessive valve overlap that can compromise low rpm drivability; reduced friction provided by roller tappets makes this combination of accelerated valve lift and reduced duration possible. Edelbrock Rollin' Thunder camshafts are performance matched to Edelbrock Total Power Package components for proven performance.
- Proven performance
- Extensive dyno and real world tested
- Feature more aggressive profiles
- Without excessive overlap
- Reduce friction
- Increased performance
- Engine swaps
Car/Engine: | Chevrolet LS |
Engine Notes: | LS1/LS6 1997-2004 Gen III |
Camshaft Type: | Hydraulic Roller |
Serie: | Rollin' Thunder |
RPM Range: | 1500-6500 |
Duration @ .050 Int/Exh: | 207°/220° |
Lift @ Valve Int/Exh: | .573"/.580" |
Lobe Separation: | 118° |
Intake Center Line: | 119.5° |
Idle Vacuum @ 1000 RPM: | 16" |
-
- Compression ratio of at least 9.5:1
- Adjustable valvetrain required
- For street high-performance and racing applications only
- Lower than stock rear gearing
- High performance torque converter (in automatic transmission equipped vehicles) are necessary.
- Please be advised that an improper installation may result in LOW MILEAGE, POOR PERFORMANCE, and COSTLY REINSTALLATION AND EVEN ENGINE DAMAGE. Installing a camshaft is a complex procedure. Please follow these instructions carefully. Failure to do so may void your warranty.