Performer Air-Gap Manifold, Chevrolet Small Block, 87-95

Performer Air-Gap Manifold, Chevrolet Small Block, 87-95

€ 536,00 *

Prijzen incl. btw excl. verzendingskosten

Speciale bestelling: Geschatte verzending over 4-8 Werkdagen*,
(indien beschikbaar bij de fabrikant*)

Productnr.: EDL-2604
Notes:

Edelbrock Part # 2604 Performer Air-Gap intake manifold is designed for 1987-95 cast iron heads... meer

Menu sluiten

Edelbrock 2604 - Performer Air-Gap Manifold, Chevrolet Small Block, 87-95

Edelbrock Part # 2604 Performer Air-Gap intake manifold is designed for 1987-95 cast iron heads with canted center bolt holes small-block Chevys. This design features an open-air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more power. High-velocity runners deliver excellent throttle response throughout the power band. The great looks of the Performer Air-Gap along with the solid idle to 5500 rpm performance make this an ideal choice for street rods and street machines. Fits spread-bore or square-bore carburetors. Will not fit under stock Corvette hood.

Based on Performer series with a unique air gap
Air gap causes cool and dense mixture more power
For idle to 5500 RPM street-driven performance
Dual-plane low-rise Intake with 180-degree firing order
Patented runner design ensures broad torque curve
Excellent throttle response and mid-range power
Fits both spread-bore and square-bore carburetors
Ideal for street rods and street machines

Car/Engine:	Chevrolet Small Block
Engine Notes:	262-400 cui - 1987-95 Cast Iron Heads
Color/Finish:	Satin
RPM Range:	Idle-5500
Serie:	Performer Air-Gap
Emission:	Without EGR
Flange:	Square Bore, Spread Bore
Intake Style:	Dual Plane
Usage:	Street
Carburator Setup:	Single-Carburator

Verdere links

Documentatie... meer

Menu sluiten

Beschikbare downloads:

Download Instructions

Menu sluiten

Installation Notes

- Manifold height: A-3.72", B-4.92" (.27" taller than # 2101)
- Carburetor pad height: 4.32"
- Carburetor recommendations: Edelbrock AVS2 or Performer Series 500-650 cfm. Use Bracket # 8031 or # 8036 for 1972-78.
- Camshaft Recommendations: Performer Plus #2102 and #2103
- Port exit dimensions: 1.14" x 1.88"
- Recommended intake gasket: GM # 10163409
- Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant # 1076, DO NOT USE END SEALS GASKETS.
- Sealant must be used on intake bolt threads if the threads extend into lifter valley or coolant passage.
- NPT/Pipe thread fittings require the use of Teflon tape or paste on threads to ensure proper seal.
- DO NOT OVERTIGHTEN NPT/Pipe fittings, this may cause the aluminum to crack around the fitting boss. NPT/Pipe thread is a tapered thread.
- Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
- Will not fir under stock Corvette hood
- Even though manifolds are compatible with EGR systems, this does not mean they are legal for use on emissions controlled vehicles. Check local laws for legality.
- Proper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehicle damage.