Edelbrock 35670 - Pro-Flo 4 EFI, Chrysler 426-572 Gen II HEMI, Dual Quad, 60 lb/hr

Pro-Flo 4 EFI, Chrysler 426-572 Gen II HEMI, Dual Quad, 60 lb/hr
€ 3.542,00 *

Prijzen incl. btw excl. verzendingskosten

Speciale bestelling: Geschatte verzending over 4-8 Werkdagen*,
(indien beschikbaar bij de fabrikant*)

  • EDL-35670
  • Edelbrock Pro-Flo 4 Dual-Quad HEMI EFI System #35670 is intended for use with 1964-71 Chrysler Gen II 426-572 HEMI engines operating in the 2,500-6,500+ RPM range.
Pro-Flo 4 Dual-Quad HEMI EFI System #35670 is intended for use with 1964-71 Mopar Gen II... meer
Edelbrock 35670 - Pro-Flo 4 EFI, Chrysler 426-572 Gen II HEMI, Dual Quad, 60 lb/hr

Pro-Flo 4 Dual-Quad HEMI EFI System #35670 is intended for use with 1964-71 Mopar Gen II 426-572 HEMI engines operating in the 2,500-6,500+ RPM range. This EFI incorporates a single-plane Air-Gap design manifold with dual square-bore 4150-style throttle bodies that bolts directly onto vehicles with a shaker hood. The Dual-Quad HEMI EFI manifold is compatible with factory-style cylinder heads but optimized for use with Victor Jr. HEMI heads. Manifold comes preassembled and ready to run with throttle bodies, 60 lb/hr injectors and fuel rails. Also included is a single-connection distributor designed to work specifically with Pro-Flo 4 providing fully sequential-port injection and infinite control over ignition and fuel events under all conditions. This system is rated for 825 horsepower at 43 PSI with all supporting sensors, ECU, and wire harnesses. Key advancements of Pro-Flo 4 EFI are its Self-Calibrating Fuel Map Technology, Wide-Band O2 Closed Loop Mixture Control, and new low-profile ECU with faster processor and upgraded Bluetooth chip for reliable connectivity with the E-Tuner app. The exclusive Edelbrock E-Tuner 4 app is Free and Available for Android and IOS based smart phone or tablet.

Car/Engine: Chrysler Hemi
Engine Notes: 426-572 Gen II Hemi
EFI Type: Multi-Point Injection
Injector Size: 60 lb/hr
Max HP Rating: 825
Verdere links
Installation Notes
    • This kit will require a high-pressure EFI fuel delivery system.
    • Fuel delivery systems are available and sold separately.
    • Edelbrock ignition coil part #22746 is recommended
    • Manifold height: 5.10".
Lees, schrijf en bespreek beoordelingen...meer
Klantbeoordelingen voor "Pro-Flo 4 EFI, Chrysler 426-572 Gen II HEMI, Dual Quad, 60 lb/hr"
Beoordeling schrijven
Beoordelingen worden na controle vrijgegeven.

De met een * gemarkeerde velden zijn verplichte velden.

Ik heb de gegevens bescherming informatie gelezen.

Variants available

Variants available

Variants available

Variants available

Variants available

Laatst bekeken