Performer Manifold, Ford 302, EGR

€ 481,00 *

Prijzen incl. btw excl. verzendingskosten

Speciale bestelling: Geschatte verzending over 4-8 Werkdagen*,
(indien beschikbaar bij de fabrikant*)

Productnr.: EDL-3721
Notes:

Edelbrock Part # 3721 Performer 302 intake manifold is designed for carbureted 302 c.i.d. Ford... meer

Menu sluiten

Edelbrock 3721 - Performer Manifold, Ford 302, EGR

Edelbrock Part # 3721 Performer 302 intake manifold is designed for carbureted 302 c.i.d. Ford V8's with EGR. Replaces the stock 4V EGR manifold using the stock 4V adapter. Manifold can be adapted for 4V use by using our #8053 4V EGR plate and the OEM EGR valve and gasket. Our #8017 adapter kit and Ford #E4ZZ9A-589E spacer may be substituted for our #8053 EGR plate (1983-85 H.O. Mustangs/Capris come with this Ford spacer). For 4V off-highway non-EGR applications, use our #8714 spacer.

For idle to 5500 RPM street-driven performance
Dual-plane low-rise intake with 180-degree firing order
Patented runner design ensures broad torque curve
Excellent throttle response and mid-range power

Car/Engine:	Ford 260-289-302
Engine Notes:	302 cui - 4V EGR
Color/Finish:	Satin
RPM Range:	Idle-5500
Serie:	Performer
Emission:	With EGR
Flange:	Square Bore
Intake Style:	Dual Plane
Usage:	Street
Carburator Setup:	Single-Carburator

Verdere links

Documentatie... meer

Menu sluiten

Beschikbare downloads:

Download Instructions

Menu sluiten

Installation Notes

- Recommended intake gasket: Edelbrock # 7220
- Carburetor recommendations: OEM 4-Bbl. Use # 8011 if necessary, for automatic transmissions use # 1483, # 1490 or # 1844.
- Includes gaskets and 4-Barrel plate # 8017 for sealing of OEM EGR plate and carburetor.
- Edelbrock carbs will work with Ford automatic overdrive trans (AOD) when used with Lokar bracket SRK-4000
- Manifold height: A-3.13", B-4.31" without EGR plates installed
- Carburetor pad height: 3.72"
- Port exit dimensions: .90" x 1.90"
- Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant # 1076, DO NOT USE END SEALS GASKETS.
- Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.

Lees, schrijf en bespreek beoordelingen...meer

Menu sluiten

Klantbeoordelingen voor "Performer Manifold, Ford 302, EGR"

Beoordeling schrijven

Beoordelingen worden na controle vrijgegeven.