Edelbrock 5056 - Torker II Manifold, Pontiac 389-455

€ 517,75 *

Prijzen incl. btw excl. verzendingskosten

Speciale bestelling: Geschatte verzending over 4-8 Werkdagen*,
(indien beschikbaar bij de fabrikant*)

  • EDL-5056
Edelbrock Part # 5056 Torker II Pontiac intake manifold is designed for 1965-79 street 389-455... meer
Edelbrock 5056 - Torker II Manifold, Pontiac 389-455

Edelbrock Part # 5056 Torker II Pontiac intake manifold is designed for 1965-79 street 389-455 c.i.d. Pontiac V8's. It can be used with Ram Air IV heads. Will not fit Ram Air V and 265/301 V8's or under Trans Am Shaker hood.

  • 2500 to 6500 RPM high-performance street engines
  • Single-plane low-rise intake good for high RPMs
  • Ideal for applications with limited hood clearance
  • For top-end HP and adequate throttle response
Car/Engine: Pontiac
Engine Notes: 389-455 cui
Color/Finish: Satin
RPM Range: 2500-6500
Serie: Torker II
Emission: Without EGR
Flange: Square Bore
Intake Style: Single Plane
Usage: Hi-Performance
Carburator Setup: Single-Carburator
Verdere links
Documentatie... meer
Installation Notes
    • Recommended intake gasket: Edelbrock # 7280
    • No provisions for OEM choke
    • OEM carb requires conversion to electric/manual choke
    • For 1968-71 use Edelbrock # 8015 throttle bracket
    • Manifold height: 1-1/4" taller than stock, A-6.88", B-8.00" measured to engine block
    • Carburetor pad height: 7.45"
    • Carburetor recommendations: Edelbrock AVS2 or Performer Series 750-800 cfm.
    • Camshaft Recommendations: Performer RPM #7157
    • Throttle Body recommendations: Edelbrock # 3878 4V 4150 style or # 3849 EFI elbow and # 3869 90mm throttle body.
    • Port exit dimensions: 1.10" x 2.06"
    • Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant # 1076, DO NOT USE END SEALS GASKETS.
    • Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
Lees, schrijf en bespreek beoordelingen...meer
Klantbeoordelingen voor "Torker II Manifold, Pontiac 389-455"
Beoordeling schrijven
Beoordelingen worden na controle vrijgegeven.

De met een * gemarkeerde velden zijn verplichte velden.

Ik heb de gegevens bescherming informatie gelezen.

Variants available

Variants available

Laatst bekeken