Edelbrock 5061 - Torker II 2-O Manifold, Chevrolet Big Block, Oval Port

€ 529,25 *

Prijzen incl. btw excl. verzendingskosten

Speciale bestelling: Geschatte verzending over 4-8 Werkdagen*,
(indien beschikbaar bij de fabrikant*)

  • EDL-5061
Edelbrock Part # 5061 Torker II 2-O intake manifold is designed for street 396-502 c.i.d. Chevy... meer
Edelbrock 5061 - Torker II 2-O Manifold, Chevrolet Big Block, Oval Port

Edelbrock Part # 5061 Torker II 2-O intake manifold is designed for street 396-502 c.i.d. Chevy V8's with large oval-port cylinder heads (1975 and earlier). Manifold not equipped with EGR. Will not fit “tall block” V8 engines. The Torker II 2-O intake manifold is a singe plane low rise intake that’s great for high performance applications that have limited hood clearance. The manifold has an exhaust crossover for easy cold-weather warm-ups, but no provisions for exhaust heated chokes or EGR. Customers will need either electric or manual choke carburetors. Not for heavy vehicles, for trucks, vans use Performer 2-O #2161.

  • 2500 to 6500 RPM high-performance street engines
  • Single-plane low-rise intake good for high RPMs
  • Ideal for applications with limited hood clearance
  • For top-end HP and adequate throttle response
  • Not for mileage or emissions applications
  • Use with large oval port heads (1975 and earlier)
  • Will fit under Corvette hood without modifications
  • Not for tall block V8 engines
Car/Engine: Chevrolet Big Block
Engine Notes: 396-454 cui - Oval Ports
Color/Finish: Satin
RPM Range: 2500-6500
Serie: Torker II
Emission: Without EGR
Flange: Square Bore
Intake Style: Single Plane
Usage: Hi-Performance
Carburator Setup: Single-Carburator
Verdere links
Documentatie... meer
Installation Notes
    • Recommended intake gasket: Edelbrock # 7203
    • Manifold height: A-3.050", B-4.600" (.25" taller than stock Corvette)
    • Carburetor pad height: 3.82"
    • Carburetor recommendations: Edelbrock AVS2 or Performer Series 650-800 cfm. Use bracket # 8031 for 1972-78.
    • Camshaft Recommendations: Torker Plus #5062
    • Port exit dimensions: 1.35" x 1.90"/1.60" x 1.90"
    • Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant # 1076, DO NOT USE END SEALS GASKETS.
    • Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
Lees, schrijf en bespreek beoordelingen...meer
Klantbeoordelingen voor "Torker II 2-O Manifold, Chevrolet Big Block, Oval Port"
Beoordeling schrijven
Beoordelingen worden na controle vrijgegeven.

De met een * gemarkeerde velden zijn verplichte velden.

Ik heb de gegevens bescherming informatie gelezen.

Variants available

Variants available

Variants available

Laatst bekeken