Cylinder Head, Ford 429-460, Performer RPM, 75cc, Hydraulic Roller

Cylinder Head, Ford 429-460, Performer RPM, 75cc, Hydraulic Roller

€ 1.620,25 *

Prijzen incl. btw excl. verzendingskosten

Speciale bestelling: Geschatte verzending over 4-8 Werkdagen*,
(indien beschikbaar bij de fabrikant*)

Productnr.: EDL-60675
Notes:

The Edelbrock #60675 Performer RPM cylinder head is designed for 1968-87 429/460 Big-Block Ford... meer

Menu sluiten

Edelbrock 60675 - Cylinder Head, Ford 429-460, Performer RPM, 75cc, Hydraulic Roller

The Edelbrock #60675 Performer RPM cylinder head is designed for 1968-87 429/460 Big-Block Ford applications. The Edelbrock #60675 Performer RPM head is perfect for street performance, daily drivers, street rods and muscle cars where seat-of-the-pants performance is needed. This cylinder head delivers great throttle response and power from 1500 to 6500 rpm. They also feature the highest quality intake and exhaust valves and valve springs.

Out-of-the-box bolt-on performance
Design that improves intake port alignment
Outstanding high performance street head
Provides a semi-open combustion chamber
9.2:1 Compression with flat top pistons
8.8:1 Compression with 1987-up TBI dished pistons
Match with Edelbrock multi-point EFI to maximize

Car/Engine:	Ford Big Block
Port Volume Intake / Exh:	292cc / 100cc
Serie:	Performer RPM
Engine Notes:	460 cui
HP Range:	500-600
Exhaust Port Location:	Standard
Chamber Volume:	75cc
Valve Sizes Intake / Exh:	2.19'' / 1.76''
Camshaft Type:	Hydraulic Roller
Max. Lift:	0.700''
Valve Spring Diameter:	1.55''

Verdere links

Documentatie... meer

Menu sluiten

Beschikbare downloads:

Download Instructions

Menu sluiten

Installation Notes

- EQUIPPED WITH SPRINGS FOR USE IN HYDRAULIC ROLLER CAMSHAFT APPLICATIONS
- Performer RPM 460 heads accept factory exhaust, aftermarket headers and factory valvetrain components.
- Requires the use of 3/8" diameter pushrods.
- Match with Edelbrock head gasket sets.
- Recommended spark plugs are Champion RC12YC or equivalent 14mm x 3/4" reach with flat gasket seat.
- Deck thickness: 5/8"
- Rocker stud diameter: 7/16"
- Pushrod diameter: 3/8" (width of slot in guide plate).
- Ideal for high-performance's street and drag racing
- Over 500+ hp at 6500 rpm (+30 hp more than ported factory heads) and 525+ ft-lbs. of torque at 4500 rpm with the Performer RPM Total Power Package
- Intake ports can be opened up to match Victor manifolds #2965 and #2966