Performer RPM Q-Jet 2-O Manifold, Chevrolet Big Block, Oval Port, For Quadra-Jet

Performer RPM Q-Jet 2-O Manifold, Chevrolet Big Block, Oval Port, For Quadra-Jet

€ 506,50 *

Prijzen incl. btw excl. verzendingskosten

Speciale bestelling: Geschatte verzending over 4-8 Werkdagen*,
(indien beschikbaar bij de fabrikant*)

Productnr.: EDL-7164
Notes:

Edelbrock Part # 7164 Performer RPM Q-Jet intake manifold is designed for street 396-502 c.i.d.... meer

Menu sluiten

Edelbrock 7164 - Performer RPM Q-Jet 2-O Manifold, Chevrolet Big Block, Oval Port, For Quadra-Jet

Edelbrock Part # 7164 Performer RPM Q-Jet intake manifold is designed for street 396-502 c.i.d. Chevy V8's with large oval-port (1975 and earlier) heads. This intake manifold is designed works with spread-bore carburetors, but also works with Edelbrock square-bore carbs without an adapter. No provisions for hot air style chokes. Accepts divorced choke, late-model waterneck, air-conditioning, alternator and HEI equipment.

Best for the ultimate in street high-performance
Designed for 1500 to 6500 RPM street-driven power
Dual-plane high-rise intake with 180-degree firing order
Produces incredible top-end horsepower
Retains good throttle response and acceleration
Larger plenum and runners maximize other upgrades
Edelbrock total power package maximizes gains
Designed for spread-bore Q-Jet carburetors

Car/Engine:	Chevrolet Big Block
Engine Notes:	396-454 cui - Oval Ports
Color/Finish:	Satin
RPM Range:	1500-6500
Serie:	Performer RPM
Emission:	Without EGR
Flange:	Spread Bore
Intake Style:	Dual Plane
Usage:	Performance
Carburator Setup:	Single-Carburator

Verdere links

Documentatie... meer

Menu sluiten

Beschikbare downloads:

Menu sluiten

Installation Notes

- Recommended intake gasket: Edelbrock # 7203
- Manifold height: A-4.45", B-6.0"; Carb pad height: 5.22"
- Carburetor recommendations: Edelbrock AVS2 or Performer Series 650-800 cfm. Use bracket # 8031 for 1972-78.
- Camshaft Recommendations: Performer RPM Camshaft #7162
- Port exit dimensions: 1.60"w x 1.94"t.
- Will not fit under the stock hood of Corvette, 1964-67 Chevelle, or 1967-81 Camaro.
- Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant # 1076, DO NOT USE END SEALS GASKETS.
- Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.