Timing Chain and Gear Set, Chrysler 383-440, 1 Bolt

Timing Chain and Gear Set, Chrysler 383-440, 1 Bolt

€ 124,25 *

Prijzen incl. btw excl. verzendingskosten

Speciale bestelling: Geschatte verzending over 4-8 Werkdagen*,
(indien beschikbaar bij de fabrikant*)

Productnr.: EDL-7804
Notes:

Performer-Link timing chain sets are for use with Edelbrock or stock cams. They have a... meer

Menu sluiten

Edelbrock 7804 - Timing Chain and Gear Set, Chrysler 383-440, 1 Bolt

Performer-Link timing chain sets are for use with Edelbrock or stock cams. They have a solid-bushing chain for a true bearing surface that rolls with the sprockets, eliminating chain stretch.

Solid bushing chain resists stretching
For use with stock or Edelbrock camshafts
Stress proof steel crank gears
3 Keyway setting points to ensure accurate timing
True bearing surface rolls with the sprockets

Car/Engine:	Chrysler Big Block
Engine Notes:	361-383-400-426-440 (1 Bolt)

Verdere links

Menu sluiten

Installation Notes

- Performer roller chain sets are engineered to operate up to 6500 rpm.
- Never hammer directly on chain or sprockets. You can crack the hardened links and pins and cause early failures.
- Use a sleeve for installations that require hammering, a brass drift punch may be used if you carefully alternate blows on either side of the sprocket to avoid cocking.
- Never stretch the chain with a screwdriver.
- Check for clearance between the timing chain and block and between the chain and front cover before reassembly.
- Be sure that both cam and crank sprockets are exactly in line with each other. Misalignment can cause chain to break