Timing Chain and Gear Set, AMC 290-401

€ 156,25 *

Prijzen incl. btw excl. verzendingskosten

In Stock - Ready to ship,
Delivery time appr. 1-3 Workdays

Productnr.: EDL-7818
Notes:

Performer-Link timing chain sets are for use with Edelbrock or stock cams. They have a... meer

Menu sluiten

Edelbrock 7818 - Timing Chain and Gear Set, AMC 290-401

Performer-Link timing chain sets are for use with Edelbrock or stock cams. They have a solid-bushing chain for a true bearing surface that rolls with the sprockets, eliminating chain stretch.

Solid bushing chain resists stretching
For use with stock or Edelbrock camshafts
Stress proof steel crank gears
3 Keyway setting points to ensure accurate timing
True bearing surface rolls with the sprockets

Car/Engine:	AMC / Jeep
Engine Notes:	290-304-343-360-390-401 cui

Verdere links

Menu sluiten

Installation Notes

- Performer roller chain sets are engineered to operate up to 6500 rpm.
- Never hammer directly on chain or sprockets. You can crack the hardened links and pins and cause early failures.
- Use a sleeve for installations that require hammering, a brass drift punch may be used if you carefully alternate blows on either side of the sprocket to avoid cocking.
- Never stretch the chain with a screwdriver.
- Check for clearance between the timing chain and block and between the chain and front cover before reassembly.
- Be sure that both cam and crank sprockets are exactly in line with each other. Misalignment can cause chain to break

Lees, schrijf en bespreek beoordelingen...meer

Menu sluiten

Klantbeoordelingen voor "Timing Chain and Gear Set, AMC 290-401"

Beoordeling schrijven

Beoordelingen worden na controle vrijgegeven.